Neutrasafe Powder

Description

Download our Technical Data Sheet Click Here…

Neutrasafe as the name implies is a Neutral & Safe Neutral pH rust remover. Neutrasafe works by selectively attacking the rust present on the surface of the metal and removing it into the solution of the rust remover. The product works in cavities, crevices and volutes and safely removes corrosion within seconds.

There is no reaction of the Neutrasafe chemical with the metal and hence no tarnishing or color change of the metal surface.

Generic rust removers are formulated with very strong acids having pH of 1.0 to 2.0 whereas Neutrasafe has a pH of 6 which is the same pH as of human skin. It is safe to work with limited personal protection equipment. Neutrasafe has also got the advantage that the re-rusting is minimized due to the absence of strong acids.

There is also no change in the dimensions of the product when the rust is removed. The product can be used again and again and does not need to be replaced but only topped up in the tank.

The product can be used on various steels, cast iron, copper & aluminum or any other metal upon trials.

The product can be used for cleaning process equipment, automotive parts, engine components, domestic household equipment, aerospace components, electronic and electricals etc. There is also no change in the dimensions of the product when the rust is removed. The product can be used again and again and does not need to be replaced but only topped up in the tank. The product can be used on various steels, cast iron, copper & aluminum or any other metal upon trials.

Features

• Quick action
• Easy to use
• Safe product with neutral pH
• No fumes generated
• No effect on environment and can be easily disposed off
• User friendly
• Does not cause staining of the surface

Usage

Small Parts:

If a part can be is small, it should be dipped in the solution and checked for removal of rust. Flash  rust or fresh rust will be removed within seconds.  A few months old rust will take a few minutes. Very heavily rusted components which have rusted  over much longer durations may have to be dipped for longer time period.

 For large parts:

Apply solution with a brush, spray or sponge on the rusted surface. Some scrubbing with scotch brite may be required to loosen up the rust. Also powder at higher concentration may also be used for larger parts.

 Technical Specifications